fbpx

Designing HPE Hybrid IT Solutions

Tanfolyam kódja:
MFHPHYBRID
Tanfolyam hossza:
40 tanóra, 5 nap, 9.00-16.30
Ára:
589 500 Ft + Áfa
Rövid ismertetés:

The Designing HPE Hybrid IT Rev. 19.21 course is design to teach students the intermediate level skills to plan, design, recommend, and demonstrate HPE Hybrid IT solutions and deliver a proof-of-concept for a given solution to a customer. The course is five days in duration and includes lectures and activities in the ratio of approximately 25/75 (lecture/activities). Activities include sizing exercises using tools available from sources such as the HPE Partner Portal and exercises using HPE emulators.

Előfeltételek:

The ideal candidate typically has a minimum of three years of design and/or operational experience or equivalent in at least one of the core HPE areas (Server, Storage, and Networking) and six months design and/or operational experience or equivalent in other HPE solutions and technologies.
Suggested prerequisites
HPE ATP - Hybrid IT Solutions V1 or 01120590 - Building HPE Hybrid IT Solutions, Rev. 18.41

Kiknek ajánljuk?

After you successfully complete this course, expect to be able to:
Describe, differentiate, and apply industry standard architectures and technologies.
Gather and analyze customer business and technical requirements
Recommend and position HPE Hybrid IT products

Képzés nyelve:
Magyar, igény esetén angol
Részletes leírás:

 Module 1: Introduction to a Hybrid World

• An introduction to Reference Architectures and Reference Configurations (3 slides)
• Activity: Synergy and 3PAR Reference Architecture (5 minutes)
• HPE overview (8 slides)
• HPE Hybrid IT (7 slides)
• Activity: Navigating the Hybrid IT portfolio at the HPE website (8 minutes)
• Learning check questions appear after prime time 1 (20 minutes into the module)
• Learning check answers are near the end of the module
• Summary
• Prelearning check question for module 2

Module 2: Architecting and designing Hybrid IT solutions

• Assessing the customer’s requirements and environment (17 slides)
• Selecting the HPE platform (20 slides)
• HPE tools for selecting solution components (28 slides). Demos of HPE Switch selector, SSD Storage Selector, HPE Storage Sizer, HPE OneConfig Advanced, and HPE 3PAR NinjaSTARS are interspersed throughout this section.
• Developing the proposal (3 slides)
• Solution installation, configuration, and setup (4 slides)
• Activity – Lab exercise (emulator): Monitoring storage with HPE InfoSight
• Learning check questions appear after prime time 1 (20 minutes into the module)
• Learning check answers are near the end of the module
• Summary
• Prelearning check question for module 3

Module 3: Recommending Hybrid IT compute solutions for customer use cases

• HPE has it all (2 slides)
• Customer scenario 1: Microsoft Exchange Server 2016 on HPE ProLiant DL380 Gen10 Server
– Introducing the customer and customer requirements (2 slides)
– Activity: Information resources [Reference Architecture, Exchange 2016 Preferred Architecture, Exchange Server Role Requirements Calculator, Ask the Perf Guy – Sizing Exchange 2016 Deployments] (20 minutes)
• Building blocks of the solution (10 slides)
• Security in HPE servers (3 slides)
• Management tools (15 slides) + activities
– Activity: ProLiant server management technologies (20 minutes)
– Activity: Preboot environment (5 minutes)
– Demo: UEFI System Utilities and UEFI Shell
– Activity: Performing basic shell operations in UEFI (25 minutes)
• HPE rack and power (2 slides) + activities
– Activity: HPE Reference Architecture for Microsoft Exchange Server 2016 on
HPE ProLiant DL380 Gen10 Server (15 minutes)
– HPE Sizer for Exchange Server 2016 (30 minutes)
• Backup slides: Alternative servers for smaller environments (7 slides)
• Customer scenario 2: HPE Reference Architecture for Microsoft SQL Server 2017 on Red Hat Enterprise Linux with HPE ProLiant DL560 Gen10
– Introducing the customer and customer requirements (2 slides)
– Activity: Information resources [HPE Reference Architecture for Microsoft SQL Server 2017 on Red Hat Enterprise Linux with HPE ProLiant DL560 Gen10, The Exchange 2016 Preferred Architecture, ProLiant DL560 Gen10 server QuickSpecs, Workload-based Performance and Tuning Guide for Gen10 servers and HPE Synergy, and Operating System Support Matrix] (25 minutes)
• Building blocks of the solution (3 slides)
• Processors in HPE servers (10 slides)
• Memory for HPE servers (3 slides) + activities:
– Activity: HPE Persistent Memory (10 minutes)
– Demo: Memory configurator
• Management tools (10 slides) + activities
– Activity: Full control over all user interfaces [iLO5] (5 minutes)
– Demo: Intelligent Provisioning
– Demo: Smart Storage Administrator
– Activity: HPE Reference Architecture for Microsoft SQL Server 2017 on Red Hat Enterprise Linux with HPE ProLiant DL560 Gen10 (15 minutes
• Backup slides: Alternative servers for smaller environments (1 slide)
• Activity – Lab exercise (emulator): Configuring ProLiant Gen10 and iLO 5 Security
• Learning check questions appear after prime time 1 (20 minutes into the module)
• Learning check answers are near the end of the module
• Summary
• Prelearning check question for module 4

Module 4: Recommending HPE data center networking solutions for customer use cases

• Customer scenario 3: Optimize data center networking with Cloud-First approach
– Introducing the customer and customer requirements (2 slides)
– Activity: Information resources [HPE Cloud-First Reference Architecture Guide—2000 servers, HPE FlexFabric 12900E QuickSpecs, and HPE FlexFabric 5940 QuickSpecs (25 minutes)
• Building blocks of the solution (4 slides)
• Networking technologies and architectures (5 slides)
• Management tools (4 slides) + activities
– Activity: HPE Cloud-First Reference Architecture Guide—2000 Servers (30 minutes)
• Backup slides: Alternative components for smaller environments (9 slides)
• Activity – Lab exercise (emulator): Configuring HPE Networking
• Activity – Lab exercise (emulator): Working with HPE Composable Fabric (Plexxi)
• Learning check questions appear after prime time 1 (20 minutes into the module)
• Learning check answers are near the end of the module
• Summary
• Prelearning check question for module 5

Module 5: Recommending Hybrid IT Storage Solutions for customer use cases

• Customer scenario 4: Red Hat OpenShift on HPE Synergy and HPE Nimble Storage
– Introducing the customer and customer requirements (2 slides)
– Activity: Information resources [HPE Reference Configuration for Red Hat OpenShift on HPE Synergy and HPE Nimble Storage, HPE Deployment Guide for Red Hat OpenShift Container Platform on HPE Synergy with HPE Nimble Storage, and RHEL OpenShift Container Platform: Sizing Considerations] (20 minutes)
• Building blocks of the solution (1 slide)
– HPE Nimble Storage (4 slides)
– HPE FlexFabric (3 slides)
– Storage technologies (3 slides)
• Management tools (5 slides) + activities
– Activity: HPE Reference Configuration for Red Hat OpenShift on HPE Synergy

Module 6: Recommending HPE software-defined and cloud solutions for customer use cases

• Customer scenario 6: Red Hat OpenShift on HPE Synergy and HPE Nimble Storage
– Introducing the customer and customer requirements (2 slides)
– Activity: Information resources [HPE Reference Configuration for Red Hat OpenShift on HPE Synergy and HPE Nimble Storage, HPE Deployment Guide for Red Hat OpenShift Container Platform on HPE Synergy with HPE Nimble Storage, and RHEL OpenShift Container Platform: Sizing Considerations] (30 minutes)
• Building blocks of the solution (2 slides)
– HPE Synergy (8 slides)
• Management tools (14 slides) + activities
– Activity: HPE Reference Configuration for Red Hat OpenShift on HPE Synergy and
HPE Nimble Storage (15 minutes)
• Backup slides: Alternative components for different environments (4 slides)
• Customer scenario 7: HPE ProLiant for Microsoft Azure Stack data protection with Veritas NetBackup, HPE StoreOnce, and Cloud Bank Storage
– Introducing the customer and customer requirements (2 slides)
– Activity: Information resources [HPE Reference Architecture on VMware Cloud Foundation on HPE Synergy Reference Architecture] (15 minutes)
• Software-defined infrastructure (3 slides)
• Building blocks of the solution (1 slide)
– HPE Synergy (4 slides)
• HPE Networking (2 slides)
• Management tools (4 slides)
• HPE RESTful API and PowerShell cmdlets (4 slides) + activities
– Activity: HPE Reference Architecture for VMware Cloud Foundation on HPE Synergy (15 minutes)
• Activity – Lab exercise (emulator): Configuring composable infrastructure
• Activity – Lab exercise (emulator): Managing server, networking, and storage datacenter components with HPE OneView
• Activity – Lab exercise (emulator): Using HPE OneView Global Dashboard
• Activity – Lab exercise (emulator): Using PowerShell cmdlets to manage data center infrastructure
• Activity – Lab exercise (emulator): Using REST API for automation and integration
• Learning check questions appear after prime time 1 (20 minutes into the module)
• Learning check answers are near the end of the module
• Summary
• Prelearning check question for module 7

Module 7: Recommending Hybrid IT hyperconverged solutions for customer use cases

• Customer scenario 8: VMware Horizon on HPE SimpliVity 380 Gen10
– Introducing the customer and customer requirements (2 slides)
– Activity: Information resources [HPE Reference Architecture for VMware Horizon on HPE SimpliVity 380 Gen10, HPE SimpliVity 380 Gen10 QuickSpecs, and HPE SimpliVity 2600 Gen10 QuickSpecs] (25 minutes)
– Activity: HPE SimpliVity efficiency (7 minutes)
– Industry standard architectures and drivers (3 slides)
• Building blocks of the solution (14 slides)
• Management tools (4 slides) + activities
– Activity: HPE Reference Architecture for VMware Horizon on HPE SimpliVity 380 Gen10 (15 minutes)
• Backup slides: Alternative servers for other environments (3 slides)
• Backup slides: Data virtualization platform (3 slides)
• Learning check questions appear after prime time 1 (20 minutes into the module)
• Learning check answers are near the end of the module
• Summary
• Prelearning check question for module 8

Module 8: Recommending HPE Density and Mission Critical Solutions for customer use cases

• Customer Scenario 9: Artificial Intelligence on HPE Elastic Platform for Analytics
– Introducing the customer and customer requirements (2 slides)
– Activity: Information resources [HPE Reference Architecture for AI on HPE Elastic Platform for Analytics (EPA) with TensorFlow and Spark, HPE Reference Configuration for Elastic Platform for Analytics (EPA), and HPE EPA Sizing Tool] (25 minutes)
• Building blocks of the solution (1 slide)
• High Performance Computing (5 slides)
• Big Data (3 slides)
• HPE Services (5 slides)
• Management tools (2 slides) + activities
– Activity: HPE Sizer for the Elastic Platform for Analytics (30 minutes)
• Backup slides: Alternative servers for different environments (6 slides)
• Customer scenario 10: HPE Reference Architecture for Oracle 18c OLTP and OLAP workloads on HPE Superdome Flex and HPE 3PAR Storage Reference Architecture
– Introducing the customer and customer requirements (2 slides)
– Activity: Information resources [HPE Reference Architecture for Oracle 18c OLTP and OLAP workloads on HPE Superdome Flex and HPE 3PAR Storage, HPE Superdome Flex Quickspecs, HPE Superdome Flex server architecture and RAS] (25 minutes)
• Building blocks of the solution (5 slides)
• Management tools (1 slide) + activities
– Activity: Design Superdome Flex solution (45 minutes)
• Activity – Lab exercise (emulator): Working with HPE Superdome Flex
• Learning check questions appear after prime time 1 (20 minutes into the module)
• Learning check answers are near the end of the module
• Summary

Module 9: Validating and presenting the solution

• Customer scenario: Configuring infrastructure for virtualization
– Introducing the customer and customer requirements (2 slides)
– Activity: Configuring infrastructure for virtualization and presenting recommended solution (30 minutes)

 

Kapcsolódó vizsgák:

Designing HPE Hybrid IT Solutions (HPE0-S57)
https://certification-learning.hpe.com/tr/datacard/Exam/HPE0-S57

Vissza


Hasonló tanfolyamok listája:

A tanfolyamon a hallgatók elsajátíthatják a számítógépes hálózatok tervezését és üzemeltetését biztonsági szempontból.

Learn basic concepts and develop skills  necessary to administer IT security fundamental tasks.

Validate and enhance your skills and optimally manage Check Point advanced security management systems.

This course teaches students how to identify, recommend, and explain HPE Nimble storage solutions. It covers the HPE Nimble hardware and software, initial configuration, HPE Nimble Storage Volumes, snapshots, and replication.
The course uses participant centered learning and hands-on labs.

This course teaches students about HPE server architectures and associated technologies as well as their functions, features, and benefits. Additionally, students will learn about planning and designing HPE server solutions and positioning HPE server solutions to customers.
This course uses participant centered learning and hands-on emulators. Emulators use software to replicate HPE Server technologies and allow learners to engage in lab activities using web based resources.

The Engineering Cisco Meraki Solutions Part 1 (ECMS1) v1.1 is a one-day course that equips students with the knowledge and skills to confidently operate Cisco Meraki deployments. This instructor-led course includes live demos and guided lab practice. Students will learn how to implement core configurations for a full stack solution in the Meraki Dashboard and how to leverage essential Meraki Dashboard tools for troubleshooting.

Create custom log sources to utilize events from uncommon sources
Create, maintain, and use reference data collections
Develop and manage custom rules to detect unusual activity in your network
Develop and manage custom action scripts to for automated rule reponse
Develop and manage anomoly detection rules to detect when unusual network traffic patterns occur

After completing this course, you should be able to perform the following tasks:
Describe how QRadar SIEM collects data to detect suspicious activities
Describe the QRadar SIEM component architecture and data flows
Navigate the user interface
Investigate suspected attacks and policy violations
Search, filter, group, and analyze security data
Investigate events and flows
Investigate asset profiles
Describe the purpose of the network hierarchy
Determine how rules test incoming data and create offenses
Use index and aggregated data management
Navigate and customize dashboards and dashboard items
Create customized reports
Use filters
Use AQL for advanced searches
Analyze a real world scenario

The Implementing and Administering Cisco Solutions (CCNA) v1.0 course gives you a broad range of fundamental knowledge for all IT careers. Through a combination of lecture and hands-on labs, you will learn how to install, operate, configure, and verify basic IPv4 and IPv6 networks. The course covers configuring network components such as switches, routers, and wireless LAN controllers; managing network devices; and identifying basic security threats. The course also gives you a foundation in network programmability, automation, and software-defined networking.

This course teaches you how to implement and operate enterpriselevel Aruba campus switching solutions. Hand-on labs give you experience with ArubaOS-Switches, including securing access, redundancy technologies such as Multiple Spanning Tree Protocol (MSTP), link aggregation techniques including Link Aggregation Protocol (LACP) and switch virtualization with HPE’s Virtual Switching Framework (VSF). You will also learn to configure dynamic routing with Open Shortest Path First (OSPF) and Border Gateway Protocol (BGP), network optimization via Quality of Service (QoS), IP multicast routing leveraging Protocol Independent Multicast (PIM), and protecting the network using Access Control Lists (ACLs). This course is approximately 30% lecture and 70% hands on lab exercises.

This course teaches the HPE OneView 5.X infrastructure management solution and is the supporting training course for the exam requirement in the certification HPE Product Certified - OneView [2020].
Topics covered in this course include:
• HPE OneView architectural model
• Product features and functions
• How to configure
• How to recommend and demonstrate

Tanfolyam naptár
H K Sze Cs P Szo V
26 27 28 29 30 1 2
3 4 5 6 7 8 9
10 11 12 13 14 15 16
17 18 19 20 21 22 23
24 25 26 27 28 29 30
31 1 2 3 4 5 6
Tanfolyam időpontok

Első oktatási nap:

2021-05-10  (Hétköznap napközbeni (09.00 - 16.30))

Jelentkezési határidő:

2021-05-03

Képzés nyelve::

Magyar

A tanfolyam ugyan még nem indult el, de a jelentkezési határidő lejárt. Hívd ügyfélszolgálatunkat, hátha még tudunk helyet biztosítani!


Első oktatási nap:

2021-06-22  (Hétköznap napközbeni (09.00 - 16.30))

Jelentkezési határidő:

2021-06-15

Képzés nyelve::

Magyar

Első oktatási nap:

2021-09-27  (Hétköznap napközbeni (09.00 - 16.30))

Jelentkezési határidő:

2021-09-20

Képzés nyelve::

Magyar

Első oktatási nap:

2021-11-08  (Hétköznap napközbeni (09.00 - 16.30))

Jelentkezési határidő:

2021-11-01

Képzés nyelve::

Magyar

Ha egyik időpont sem felel meg neked, de érdekel a tanfolyam, kérünk, hogy add le jelentkezésedet időpont nélkül! Új időpont felvételekor értesíteni fogunk.


Amennyiben munkatársaiddal zárt csoportos képzésen veszel részt és kaptál a tanfolyam időpont kódot, itt tudod leadni jelentkezésedet


Jelentkezésedet leadhatod a kitöltött jelentkezési lap visszaküldésével is